Figure 6 Monofacial Module Installation Annex
15
Figure 5 Clamp Installation of Monofacial Module
bolt
bolt
laminated part
laminated part
aluminum frame
aluminum
frame
bracket
bracket
washer
washer
washer
spring washer
clamp
clamp
washer
spring washer
nut
nut
5.2.3 Installation and Mechanical Load of Monofacial Module
Monofacial modules can be installed with bolts into 4 outer installation holes, bolts into 4 inner installation holes, bolts into
400mm-span installation holes, and fixtures. Detailed installation positions and corresponding load capacities are shown
in the table below.
Installation with bolts into 4 outer holes
Beam perpendicular to long sides
Installation with bolts into 4 inner holes
Beam perpendicular to long sides
Installation with bolts into 400mm-span holes
(distance between frame and tube C≤30mm)
Beam perpendicular to long sides
(clamp length≥40mm)
Beam perpendicular to short sides
(clamp length≥40mm)
on long sides
(clamp length=150mm)
