Longevity TIGWELD 250 EX, Operating Manual

Page: 17 / 28

TIGWELD® 250 EX
www.longevity-inc.com
5. ER80S-D2 is for welding 4130 chrome moly tubing if a higher strength weld is required.
6.
1/16” diameter filler should be used when material is 1/8” and less thick. 3/32” diameter
filler rod can be used for 1/8” and thicker material. For more info on Filler Rods, go to
www.freeweldingforum.com
Setting Up the Argon Regulator:
The argon regulator (pictured below) is included with your unit. Setting it up to your
argon bottle is easy. Simply screw in the valve to the bottle and set the pressure to
about
. Use 100% Argon at 15-25 CFH (cubic feet per hour). Set the gas flow using the regulator
on the gas bottle. Use higher flow when extending the tungsten electrode to reach into corners or
gaps. We recommend about 18 CFH. Remember, that you also have a post flow setting on the
unit to pass more argon after the arc to cool the electrode.
Argon Regulator Assembled.
*argon regulator may not be the same as pictured.