Longevity LGAP200, User Manual, Page: 9 / 22

Longevity LGAP200 User Manual V1.0 Issued 2020-5-13
Copyright © Cornick Pty. Ltd. 2020 http://www.cornick.com.au
---- 7 ----
Device Setup
1. Connect the device as shown above.
2. Change the IP address of your PC/Laptop to 192.168.10.199. (Other number except
192.168.10.1 may also work)
3. The default IP address of the device is 192.168.10.1. Open your web browser and type
192.168.10.1 into the address bar of your browser and press <ENTER>.
Note:
If the browser is not working properly, clear the cache and cookies data of the browser.
Restart the browser and try again. (Internet Explorer or Microsoft Edge is recommended)
4. Input the password and click Login . The default password is admin.
5. Click the
Wizard
icon on the left panel to select operating mode.
Longevity LGAP200 has 4 working modes: Router, Bridge , Access Point (AP) and
Repeater .
Mode Function
Bridge Connect two network segments wirelessly
AP
(Access Point)
When connects to a wired router or switch with internet access, it creates a
wireless local area network (WLAN) for other devices such as mobile phones,
laptops etc.
Repeater
It repeats signal from a wireless router or wireless access point and rebroadcasts
the signal to other wireless devices.
Router
It provides access to the Internet or a private wireless computer network (WLAN).