Longevity LGAP100-4G User Manual V1.1 Issued 2020-5-13
Copyright © Cornick Pty. Ltd. 2020
--- 12 ---
FAQs
Q: Do I need a power supply for the 4G router?
A: No, you don’t. The 4G router is powered by 24V POE. Use a CAT5e/CAT6 cable,
connect the LAN port to the 24V POE injector supplied. Connect the LAN port to
the network device.
Q: How to reset the device?
A: Press and hold the RESET button for 5 seconds when power is on.
Q: How can I test the connection between the router and the PC?
A: You can ping the router.
For example, if the router IP address is 192.168.10.1 (default value):
i. Change the IP address of the PC to 192.168.10.xx where xx=3 to 255.
Change the subnet mask to 255.255.255.0
ii. Open Command prompt and type:
ping 192.168.10.1 <ENTER>
If the connection is successful, it will reply as follow:
Pinging 192.168.10.1 with 32 bytes of data:
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time=1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Reply from 192.168.10.1: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.10.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
Note:
Make sure 0% loss as the router is connected to the PC direct, it should
get 100% hit rate (0% loss).
The connection between the PC and the router is established.
You can also test the connection continuously by typing:
ping 192.168.10.1 -t
<ENTER>
Press
Ctrl-C
to stop testing.
Type
exit
to return to Windows platform.
Q: What is the default password for the web interface?
A: The default password is “
admin
”.
Q: Web browser displays incorrectly.
A: Clear the cache and cookies data of the browser. Close the browser and open
again.
Summary of Contents for LGAP100-4G
Page 1: ...Longevity LGAP100 4G Wireless AP User Manual...
Page 2: ......