FOR-MRRD0001-EN235 UM0.1
2.2 Press the START button
Click the start button and the treatment begins.
2.3 Adjust output intensity
You can adjust the output intensity in the MStim Arth interface, or through "+/-" button on the
unit. The output intensity should be increased slowly from small values to avoid excessive
stimulation. Since your body initially adapts to the intensity of the stimulation, you may have to
adjust the intensity level after some time to ensure optimal stimulation.
2.4 The End of Treatment
At the end of the treatment, the unit stops output and returns to the pre start state. The
indicator is switched from blue to green and flashes at 1Hz frequency, while the mobile application
interface shows "the treatment is finish."
Remove the knee pad for electrotherapy and electrode lead hose after treatment. The main
unit, electrode lead hose and the knee pad for electrotherapy are put into the box, placed in a cool
and ventilated place, ready for the next use.