24
www.longer3d.com
The default time is 80000ms.
Stable Time
: the time between stop motion of Z axis and LCD
projection. The default time is 1000ms
Bottom Height
: the height that is over cured for increasing the
adhesion between model and building platform. The default height is
0.3mm.
Lift Distance1
: the slow motion distance for separation. The default
distance value is
2mm
.
Lift Speed1
: the separation speed for slow motion range. The default
speed is
48mm/min
. It can decrease the separation force by adjusting
the value to 30mm/min for the model with fine size.
Lift Distance2
: the fast motion distance for separation, and it is a
relative distance to Lift Diantance1. Defaulted value is
2mm
.
Lift Speed2
: the separation speed for fast motion range, Defaulted
value is
300mm/min
.
6.12 Post-processing
After printing job finished, put on latex gloves, scrape the resin on the
building platform into resin vat with card attentionally, hold the
