1
2
S1
S2
P3
Prime Key
P4
P2
Speed Decrease Key
OP1
P1
Direction Key
Start/Stop Key
Press the Start/Stop Key to start or stop the pump. This key is
invalid in prime state when pump runs at full speed.
Direction Key
Press the Direction Key to change the rotating direction of the
pump and the Direction Indicator lights at the same time. This
key is invalid in prime state.
Speed Increase/decrease Key
Press the Speed Increase Key or Decrease Key one time to
increase or decrease the speed in step of 0.1 rpm. Continuously
press the increase key or decrease key to change the speed
rapidly. The Speed Increase Key and Decrease Key are invalid in
prime state.
Prime Key
In common state, press the Prime Key to enter prime state when
the pump runs at full speed (that is 100 rpm) and the LED displays
“---” for empting, filling and rinsing operation; Press the Prime
Key again to return to common state.
LED Display
Speed Increase Key
Start/Stop Key
Introduction
Acceptable pump heads for BT100-2J are YZ1515x, YZ2515x, YZII15,
YZII25, DG-1 and DG-2. The pump delivers flow rates from 0.002 to
380 mL/min. The speed can be adjusted manually or automatically
through external control interface. Store the running parameter
automatically. Easy to operate.
S
Standard Configuration
S1 Pump Head
S2 Drive
OP
Optional Fittings
OP1 External Control Module
Reference:
Make sure the power line of the pump is grounded reliably to
protect the operator in humid condition.
For detail information about external control function please see
page 4.
P
Parts
P1
Power Switch
P2
P3
P4
External Control Interface
Power Socket
Build-in Fuse
Basic Operation
Direction
Indicator
External Control
Indicator
BT100-2J OPERATING MANUAL
BT100-2J OPERATING MANUAL
