1. Enter the vibe/contrast menu as described above.
2. Highlight the Vibe selection then PRESS and HOLD the SP5 pager Button until the
screen shows.
3. Press or hold the Select Button to the desired vibration level. The level will rise
to max, Release the Select Button and press or hold again until the level goes to
minimum or desired level.
4. To exit, wait 8 seconds. And the pager will go back to the vibe/contrast menu.
Contrast
To set the Contrast Level
1. Enter the vibe/contrast menu as described above.
2. Highlight the Contrast selection then PRESS and HOLD the SP5 pager Button until
the screen shows.
3. Press or hold the Select Button to the desired Contrast. The level will increase to
max (NOTE: screen could be dark and hard to read), Release the Select Button
and press or hold again to change the level back towards the minimum or to de-
sired contrast.
4. To exit, wait 8 seconds. And the pager will go back to the vibe/contrast menu.
5. To exit this menu wait 8 additional seconds.
Settings
To view the current pager settings
1. Remove pager from the charger or reset on the T9601, T9100, or T9101 reset terminals.
2. Press the Select Button repeatedly to scroll through the settings:
C1: [System ID number] and Pager ID number
C2: [System ID number] and All Page number
C3: [System ID number] and System ID number
G: Group number
Enc: Encryption enabled (128) or none
Ver: Current Firmware Version
3. To exit, wait 8 seconds.
VIBE
CONTRAST
VIBE
VIBE
CONTRAST
VIBE
Long Range Systems
2
SP5 Quick Guide
