4
PRE-START CHECKLIST
All safety equipment is in place
_____
Sufficient gasoline in gas tank
_____
Oil in engine at proper level
_____
All fluid lines tight and connected
_____
Sufficient formulation in tank
_____
Flow rate is calibrated
_____
Nozzle is aimed properly
_____
Spray switch is in OFF position
_____
CAUTION
Before proceeding with any spraying operation, the operator should be thoroughly
familiar with starting and stopping the machine and with all the operating controls. If you
are operating the machine for the first time, exercise the machine through its full
operational sequences from a position of full visibility of the machine before operating
the machine fully remote. This is also a good idea for experienced operators who may
be operating a new machine or who may be reactivating a machine after repairs or a
period of inactivity. Refer to the operation section for starting and stopping instructions.
