Kid Klips
Complete stage 1 of the badgemaking process. Remove die and turn over then place kids klip back
(writing downwards) into die recess. Locate die back under the machine and move lever to the left. Pull
handle
towards you to complete assembly. Remove die from machine to extract
badge.
Mirrors
Complete Stage 1 of the badgemaking process. Remove die and turn over. Place metal ring, smooth
side down followed by mirror glass (mirror face downwards) and cardboard spacer. Replace die back
under the machine and move the lever in the top die fully to the left. Pull handle
towards you to
complete assembly. Remove die from machine to extract mirror.
Magnets
Complete Stage 1 of the badgemaking process. Remove die and turn over. Place unpinned back (rim
upwards) in die. Replace die back under the machine and move the lever in the top die to the left. Pull
handle
towards you to complete assembly. Remove die from machine to extract badge and to
complete, peel paper backing from magnet and stick to the centre of the badge back.
Keyrings
Complete Stage 1 of the badgemaking process. Remove die and turn over. Place plastic ring (smooth
side down) in die. Replace die back under the machine and move the lever in the top die fully to the
left. Pull handle
towards you to complete assembly. Remove die from machine to extract badge.
To complete assembly, clip keychain to hole in key fob. Locate lugs in fob to plastic ring of badge unit
and snap together by hand. Turn the back to position design.
Photo Stands
Complete Stage 1 of the badgemaking process. Remove die and turn over. Place black plastic ring
(smooth side down) in die. Replace die under the machine and move the lever in the top die fully to
the left. Pull handle
towards you to complete assembly. Remove die from machine to extract
badge. To complete assembly, locate lugs in photo stand to plastic ring of badge and snap together by
hand. Turn the back to position design.
Bottle Openers
Complete Stage 1 of the badgemaking process. Remove and turn over die, place the bottle opener in the die.
Locate die back under the machine and move lever facing you in the top die fully to the left.
Pull handle firmly towards you to complete assembly.
Remove finished unit from machine and clip keychain to holes in bottle opener.
www.londonemblem.com
London Emblem Ltd., 4 Sherwood Road, Aston Fields Industrial Estate, Bromsgrove, Worcestershire, B60 3DR
Tel: +44 (0)1329 822900 • Fax: +44 (0)1329 82900 • Email: [email protected] • www.londonemblem.com
