London Emblem Ltd., 4 Sherwood Road, Aston Fields Industrial Estate, Bromsgrove, Worcestershire, B60 3DR
Tel: +44 (0)1329 822900 • Fax: +44 (0)1329 82900 • Email: [email protected] • www.londonemblem.com
Kid Klips
Complete stage 1 of the badgemaking process then place back with writing downwards in the left
hand die. Swing die clockwise under top die and pull handle
towards you to complete assembly.
Swing die set anti-clockwise to remove
badge from machine.
Mirrors
Complete Stage 1 of the badgemaking process then place metal ring, smooth side down, followed by
mirror glass (mirror face downwards) and cardboard space into the left hand die. Swing left hand die
clockwise under top die and pull handle down towards you to complete assembly. Swing die set anti-
clockwise to remove
mirror from machine.
Magnets
Complete Stage 1 of the badgemaking process then place unpinned back (rim upwards) into left hand
die. Swing left hand die clockwise under top die and pull handle to complete assembly. Swing die set
anti-clockwise to remove badge from machine and to complete, peel paper backing from magnet and
stick to the centre of the badge back.
Keyrings
Complete Stage 1 of the badgemaking process then place plastic ring smooth side down into left
hand die. Swing left hand die clockwise under top die and pull handle
towards to complete
assembly. Swing die set anti-clockwise to remove badge unit from machine. To complete assembly, clip
keychain through hole in key fob. Locate lugs in fob to plastic ring of badge unit and snap together by
hand. Turn the back to position design.
Photo Stands
Complete Stage 1 of the badgemaking process then place black plastic ring (smooth side down)
into the left hand die. Swing left hand die clockwise under top die and pull handle towards you to
complete assembly. Swing die set anti-clockwise to remove badge unit from machine. To complete
assembly locate lugs in photo stand to black plastic ring of badge unit and snap together by hand.
Turn the back to position design.
Bottle Openers
Complete Stage 1 of the badgemaking process. Remove and turn over die, place the bottle opener in the die.
Locate die back under the machine and move lever facing you in the top die fully to the left.
Pull handle firmly towards you to complete assembly.
Remove finished unit from machine and clip keychain to holes in bottle opener.
