12
INSPECTION AND MAINTENANCE
The operator can perform most of inspection and maintenance. It may be necessary to
review the installation and operating instructions.
•
Periodically check and retighten safety strap hardware. If safety straps are damaged,
replace with new hardware.
•
Periodically check and retighten clamps as needed.
•
Periodically check latch cords to ensure latches fully engage side rails.
•
Periodically inspect cover assembly and the condition of all parts. Check for loose
bolts and parts, tighten if needed. Test the operation to ensure parts are functioning
properly and cover is in top operational condition.
•
If latches have been damaged, replace with new ones.
•
Periodically ensure anchors are clear, free of interference. If anchors have been
damaged, replace with new ones.
NOTE:
Inspection and maintenance should also be performed anytime a malfunction
is observed or suspected. If you need assistance inspecting or servicing your cover, or
if you want to order a replacement part, call the customer service number on the back
page. Always use original equipment replacement parts for your cover.
Summary of Contents for STANCE
Page 15: ......
