Loma IQ3X, Operating Instructions Manual

Page: 7 / 88

7 Operating Instructions
Original Document Copyright © Loma Systems
1: Introduction
Inspection systems are widely used and integrated into the production lines of a vast range of
businesses. Where they identify metal contamination in products ensuring they are removed
from the production line and are not supplied to customers.
Loma Systems has been designing and manufacturing inspection equipment for 50 years and has
earned a reputation for consistent quality and advance technology.
The following sections provide more information:
About this guide
This section provides you with a general introduction to the guide, its purpose and the intended
audience.
Organisation
The guide is organised into a number of chapters providing information in a logical sequence.
Document Change Control
This guide is a controlled document which is subject to change in line with changes to our
products. As the principle aim of the guide is to provide you with the information that you need,
we would welcome any comments or feedback that will enable us to make improvements to
the guide.
Document Key
Special text is used throughout the document, highlighted through the use of icons, to add notes
and warnings where appropriate.
Copyright and Acknowledgements
This guide is copyright to Loma Systems. No part of this document may be reproduced,
transmitted, transcribed, stored in a retrieval system, translated into any language, or computer
language in any form or by any means without the prior written permission of Loma Systems.
Loma Systems
Loma has offices around the world that can provide you with sales and support services. This
section includes the address and contact details for the main offices. In addition details for all
offices are available via the website at
www.loma.com .