37
Operating Instructions
Original Document
Copyright © Loma Systems
3.16 Stopping the Machine
To stop the machine, proceed as follows:
1. Push the red Stop button to stop the conveyor.
2. If you have finished using the machine, turn the Isolator Switch in an anti-clockwise direction.
This will switch off the electrical supply to the machine.
3.17 Emergency Stop
To stop the machine in an emergency, proceed as follows:
1. Press the red Emergency Stop button located in the centre under the user display. The
conveyor will then automatically stop.
3.18 Starting the Machine after an Emergency Stop
To start the machine after an emergency stop, proceed as follows:
1. Ensure that any issue that caused you to stop the machine has been cleared.
2. Turn the red Emergency Stop button clockwise to release the button which will then pop out
to its original position. The power supply to the conveyor is now restored.
3. Push the green Start button to restart the conveyor.
4. The machine is now ready to start inspecting the selected product.
Summary of Contents for IQ3X
Page 2: ...Version Number Date Reason 1 29 07 2019 Initial Release ...
Page 28: ...Thispage intentionally left blank ...
Page 33: ...33 Operating Instructions Original Document Copyright Loma Systems 3 9 IQ3X Display Menu Map ...
Page 38: ...Thispage intentionally left blank ...