Loma IQ3, User Manual

Page: 11 / 144

Introduction
Inspection systems are widely used and integrated into production lines within a vast range of
businesses, including the pharmaceutical, food and beverage industries, to identify metal
contamination in products so that they may be removed from the production line and are not supplied
to customers.
Loma Systems has been designing and manufacturing metal detection equipment for over 45 years
and has earned a reputation for consistent quality and advanced technology.
The following sections provide more information:
■
About this Guide
This section provides you with a general introduction to the guide, its purpose and the
intended audience.
■
Organisation
The guide is organised into a number of chapters providing information in a logical sequence.
This section lists and briefly describes the contents of each chapter.
■
Document Change Control
This guide is a controlled document which is subject to change in line with changes to our
products. As the principle aim of the guide is to provide you with the information that you
need, we would welcome any comments or feedback that will enable us to make
improvements to the guide.
■
Document Key
Special text is used throughout the document, highlighted through the use of icons, to add
notes and warnings where appropriate.
■
Copyright and Acknowledgements
This guide is copyright to Loma Systems. No part of this document may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language, or
computer language in any form or by any means without the prior written permission of Loma
Systems.
■
The Loma Group of Companies
Loma has offices around the world that can provide you with sales and support services. This
section includes address and contact details for the main offices but details for all offices are
available via the website at
www.loma.com .
1