Lokkii 838B Assembly Instruction Manual Download Page 2

Safety Instructions

Non-observance of these safety instructions and precautions can lead to serious injury. 

Please read the following instructions before using your barbecue.

1.  This barbecue may only be used outdoors, never indoors.

2.  Before using the barbecue, position the BBQ on a flat surface, away from overhangs and trees out of  

the wind as much as possible.

3.  Keep a secure distance of 1.5 meters from combustible materials.

4.  Do not use fluids such as petrol or similar highly flammable spirits to light or re-light the barbecue or 

add to warm or hot charcoal !

5.  The maximum amount of fuel for these BBQs is 8KG (17.6Lb)

•  Follow instructions on the fuel bag carefully. 

•  Do not put the lid on the BBQ before the flame has died out.   

•  “Do not cook before the fuel has a coating of ash”.

Warning: 

1.  The Charcoal will be very hot, take suitable precautions.

2.  Wear heat resistant oven mitts when grilling or adjusting the vent holes. 

3.  When  extinguishing  charcoal briquettes, place the lid on the bowl and close  all air vents. 

Do not use water.

4.  Do not remove ashes until all charcoal briquettes are completely burned out and fully extinguished.

5.  Remove ashes before grilling again. Insure the ashes are cold.

6.  Always keep children and pets away from the barbecue.

Maintenance:

•  Clean the drop pan with soap and water. 

•  NEVER use steel brushes, aggressive detergents or sharp objects on porcelain surfaces! This will dam-

age the surfaces.

•  To extend the life of your barbecue ,use a suitable cover.  

•  Store the BBQ in a dry area.

“ATTENTION! 

  This barbecue will become very hot, do not move it during operation”

“Do not use indoors”

“CAUTION! 

  Do not use spirit, petrol or comparable fluids for lighting or re-lighting”

“WARNING! Keep children and pets away”

P.2

Summary of Contents for 838B
















Reviews: