LOHU 5160P
User Manual
----------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Voltlaan 408 – 2681 TV Monster – Netherlands
Tel : +31208080743
Email : [email protected]
Website : www.lohuisnetworks.com
International Numbers:
Dubai :
United States:
United Kingdom:
France :
Italy:
Japan:
Argentina:
Brazil :
Pakistan:
+97142280111
+12123812983
+442033557669
+33170612716
+390662207084
+81345506867
+541152391407
+552135219853
+92217019804
-
4
-
Device Information:
Device Type
– Device type you are logged into.
Device Name
- System Name for easy identification of the Lohuis 5160P unit.
MAC Address
– Device MAC address.
Firmware Version
– Current firmware version.
Hardware Revision
– Device Hardware version.
Regulatory Domain
– Currently configured regulatory domain.
Connection Information:
Status – Connected – device is currently connected.
Not Connected – the connection has not yet been established.
Remote BSSID
– MAC address of the other network bridge.
Signal Strength
– Measure of how strongly a transmitted signal is being received by
this device.
Align Antenna
– Pressing this button brings up little tool to help proper antenna
alignment.
Frequency
– Frequency the device is operating on.
Channel Width
- Configured Channel Width (Depending on Regulatory Domain
available values are 5, 10, 20 and 40 MHz).
Data Rate
- Bit Data Rate at which this device sends packets to the other peer.
TX Packets
– Number of data packets that have been sent to the other peer.
TX Errors
- Number of data packets that have been sent but not delivered to the
other peer.
TX Bytes
– Number of bytes sent to the other peer.
RX Packets
– Number of data packets that have been received from the other peer.
RX Errors
- Number of data packets that have been received from the other peer but
had errors.
RX Bytes
– Number of bytes received from the other peer.
Packets Aggregated
- Number of aggregated superpackets that have been sent.
Packets not Aggregated
- Number of not aggregated packets that have been sent.
All Packets
- Number of all packets that have been sent.
Average Packets in one
- Average number of packets being aggregated into one
superpacket during last 10 minutes.
Average Packets in one (total)
- Average number of all packets being aggregated
into one superpacket.
Average Packets Size
- Average size of packets being aggregated.
Packet sent immediately
- Number of aggregated packets sent without waiting for
timeout.
Packet sent immediately but Aggregated
- Number of aggregated packets sent
