LOHU 2425PX
User Manual
----------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Voltlaan 408 – 2681 TV Monster – Netherlands
Tel : +31208080743
Email : [email protected]
Website : www.lohuisnetworks.com
International Numbers:
Dubai :
United States:
United Kingdom:
France :
Italy:
Japan:
Argentina:
Brazil :
Pakistan:
+97142280111
+12123812983
+442033557669
+33170612716
+390662207084
+81345506867
+541152391407
+552135219853
+92217019804
-
3
-
1. Access point
2. Station Adapter
3. Point-to-Point Bridge.
4. Wireless Repeater
5. Inter-building
• Repeater mode
Configure the radio as a wireless repeater to extend the coverage area of your wireless
network.
• VAPs (VLAN)
Assign Multi-SSIDs on your radio (one SSID per VAP) to differentiate policies and services
among users forming a wide variety of VLANs.
• QoS
Use this feature to support quality of service for prioritizing traffic from the Ethernet to the
access point.
• Wi-Fi Multi-media (WMM)
Radio also supports the voice-prioritization schemes by using the 802.11b/g wireless phones
via enable the WMM application.
•Transmit Power Control
Supports settable transmit power levels to adjust coverage cell size, ranging from full,
half(50%), quarter(25%) eighth(12.5%) and min
7
•Atheros Super G Mode
Super G mode enables the transmission up to 108Mbps
• Multiple security settings per VLAN with up to 8 VLANs
Security settings for multiple groups; so employees, guests and contractors now easily and
securely share the same infrastructure
•Access Control
The Access Control MAC address filtering feature can ensure that only trusted wireless
stations can use the radio to gain access to your LAN.
•Hidden Mode
The SSID is not broadcasted; assuring only clients configured with the correct SSID can
connect.
1-4 System Requirements
Before installing the radio, make sure your system meets these requirements
• The Category 5 UTP straight through Ethernet cable with RJ-45 connector. (Between
switch and POE). Category 5 UTP cross-over is required between PC and POE.
• The Category 5
SFTP
straight through Ethernet cable with weather-proof RJ-45
connector. (Between POE and radio)
• A 100~240 V, 50~60 Hz AC power source
• A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, or
Netscape Navigator 4.78 or above
• At least one computer with the TCP/IP protocol installed
