LOHU 2325L
User Manual
----------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Voltlaan 408 – 2681 TV Monster – Netherlands
Tel : +31208080743
Email : [email protected]
Website : www.lohuisnetworks.com
International Numbers:
Dubai :
United States:
United Kingdom:
France :
Italy:
Japan:
Argentina:
Brazil :
Pakistan:
+97142280111
+12123812983
+442033557669
+33170612716
+390662207084
+81345506867
+541152391407
+552135219853
+92217019804
-
4
-
Device Information:
Device Type
– Device type you are logged into.
MAC Address
– Device MAC address.
Firmware Version
– Current firmware version.
Hardware Revision
– Device Hardware version.
Regulatory Domain
– Currently configured regulatory domain.
System Time
- Time synchronized by NTP (Network Time Protocol).
Connection Information: Status
:
Connected – device is currently connected to an Access Point (802.11b/g Mode) or
Polling Base Station (Polling Mode).
Not Connected – the connection has not yet been established.
BSSID
– MAC address of the Access Point or Base Station the device is currently
connected to.
Signal Strength
– Access Point signal strength.
Remote Signal Strength
- Device signal strength.
Noise Level
– Level of the Noise the device is sensing on the channel.
Operational Rate
– Bit data rate at which device sends packets to the Access Point.
Remote Data Rate
- Bit data rate at which Access Point sends packets to the device.
Transmit Power
- EIRP Transmit Power at which the device is sending data over
wireless link.
TX Packets
– Number of data packets that have been sent to the Access Point.
TX Bytes
– Number of bytes sent to the Access Point.
RX Packets
– Number of data packets that have been received from the Access
Point.
RX Bytes
– Number of bytes received from the Access Point.
Ethernet Speed
- Current Ethernet port connection speed (or No Connection if there
is no connection).
Operational Settings:
Device Name
- System Name for easy identification of the device.
WLAN Interface
- Enabled or disabled, if enabled traffic goes through the interface.
WLAN Operational Mode
– Wireless LAN Operational mode the device has been
configured to.
