Page 20
Oven door
The oven door can be completely removed. This is advantageous for a thorough
cleaning of the oven.
To cool the oven, the door can be set at a 75-degree angle. To do this, open
the door, push the metal clips on the door hinges upwards and close the door
to the limit stop.
Unhinging the Oven Door
• Open the oven door and push up the clips (
Figure 37
).
• Close oven door to 5mm (
Figure 38
)
• Lift slightly from this position (
Figure 39
).
• and pull away and down (
Figure 40
).
Hanging the Oven Door Back on its Hinges
• Insert the hinges into the appropriate openings (
Figure 41
).
• Open the door slowly and press the clips shut (
Figure 42
).
• Arrest with a jerk (
Figure 43
).
• Close the door and check the correct fit! (
Figure 44
).
Cleaning the glass viewing window of the oven
If the appliance is overheated or if a gasket is damaged, the inside of the glass
viewing window of the oven may become fogged. To clean it, please proceed
as follows:
• Remove oven door as described and place it on a clean surface, undo the
handle screws (2x) and remove the oven door handle (
Figure 45
).
• Swivel open the oven door panel on the handle side and move it forwards
to remove it (
Figure 46
).
• Remove the viewing window glazing unit and the silicone gasket (
Figure 47
).
CAUTION: Remember the correct position of the silicone gasket
• Carefully clean the glass. To do so, use gentle cleaning agents (e.g. soapy
water) and a soft cloth.
• Reassemble the parts in reverse order.
Cleaning the glass viewing window of the combustion
chamber
To clean the glass viewing window use gentle cleaning agents (e.g. soapy wa-
ter) and a soft cloth.
In adverse weather conditions or as a result of incorrect operation or the use
of unsuitable fuels the inside of the combustion chamber window may become
fogged. For cleaning, please proceed as follows:
• Open the combustion chamber door.
• Undo the 2 Stück slotted screw on the cast fastener
• Remove the ast fastener carefully.
Assembly
• Reassemble the parts in reverse order.
• Reinstall the complete glazing unit in reverse order to the disassembly..
Figure 37
Figure 38
Figure 39
Figure 40
Figure 41
Figure 42
Figure 43
Figure 44
Figure 45
Figure 46
Figure 47
