SAUNO
DRYING CHAMBER
5
BEFORE CONNECTING THE EQUIPMENT
TO THE MAINS
Check that:
• the fan wheel can rotate freely and that no loose
objects are left inside the drying unit.
• all inspection hatches are correctly fitted.
• the connection cable that powers the drying unit is in
good condition.
• all visible fasteners are tightened. They might need
additional tightening after transport.
• the labelling of the drying unit matches your electrical
connection.
• Check the function of the thermostat.
ELECTRICAL SYSTEM
Risk of electric shock
The electrical system may only be opened by a
qualified electrician. Always cut the power to the
electrical system before it is opened or servicing is
carried out.
Risk of accumulating condensed water inside
the junction box due to large variations in
temperature and extreme weather.
Cut the power and let a qualified electrician
check that the junction box is dry.
MAINTENACE
After every fifth drying cycle or as needed:
• Cut the power.
• Remove the drying unit from the drying chamber.
• Open the inspection hatches of the drying unit and
clean heating elements, the cooling air intake of the
electrical motor and the fan wheel with a soft brush,
soap and water. Make sure that all the water has dried
up before you re-install the inspection hatches and
connect the power cable to the drying unit
• Only use original parts supplied and approved by
Logosol for the purpose. Use only purpose made
original parts from Logosol.
After service, the drying
unit has to be restored to its original design.
All inspection hatches and covers must be correctly
installed before the drying unit is taken into use. The
drying unit may not be modified or rebuilt in any way.
• The warning labels on the machine is for your and
others safety. Damaged or illegible labels must be
replaced.
