P·12
V. CARE AND MAINTENANCE
GENERAL GUIDELINES
Avoid knocking or bumping all control parts;
• Avoid prolonged exposure of your scooter to extreme conditions, such as over
heating, cold or moisture; Keep the tiller console clean;
• Check all connectors to ensure they are connected firmly and securely;
• Check all electrical connectors including the charger’s connectors. Make sure they are
tight and not corroded. Put the battery flat within the battery box;
• Pull out the key switch each time after usage to avoid unnecessary capacity
consumption;
• The scooter has a power saving facility, when you stop using it for up to 20 minutes,
the power shuts off automatically. If you need to drive again, please pull out the key and
reinsert it to restart;
• The body shroud has been sprayed with a clear sealant coating. You can apply a light
coat of a car wax to retain its high-gloss appearance;
• All wheel bearings are lubricated and sealed. They require no further lubrication;
You should perform a safety check before each use to make sure your scooter operates
smoothly and safely. It’s suggested that your scooter should be checked weekly, monthly and
biannually according to the items in table 2.
Table 2:
Inspection items
At any time
Weekly
Monthly
Biannually
All parts
•
Turning, driving, preset and
disassembly etc.
•
Brake system
•
Connections
•
Battery condition
•
Tire condition
•
Motors
•
Devices
•
Cleaning
•
