Logiware go1984, User Manual

Page: 129 / 138

125
go1984 User manual © 2000-2021 logiware GmbH
Additional settings
You set the image record pause using the following sliders. The default setting is 200 ms, i.e. 5
images per second (fps). In order to avoid increasing the network load and memory
requirements unnecessarily, you should in this case set the actual value required rather than
the highest possible value. In most cases, using higher image refresh rates hardly results in
scenes with greater information content.
As with many other sliders, you also have the option here to specify for your own convenience
the value you want in an additional window which opens when you double-click on [Pause
between two frames].
Some additional information about the camera is displayed at the bottom of the screen.