6
380 mm
975 mm
615 mm
1210 mm
380 mm
975 mm
615 mm
1210 mm
A
B
Box holder with
clamps – upper
position
Box holder
with clamps
– lower position
2.1 Box holder
The rotator can be equipped with one or two sets of box holders,
adjusted for different box sizes. When loosening the screw (A),
the box holder can be moved between the two different positions.
NOTE!
The screw has to be tightened, before using the product.
Adjusting the distance
Fork span 560mm:
•
For box widths of 800, 850 or 1000mm.
Fork span 680mm:
•
For box widths of 1000, 1050 and 1200mm.
Setting of height
The box holders can be placed in two different heights
It is important that the box holders are placed approx. on the level of or above
•
the load centre of the load.
If possible, use two box holders in each side
•
1) When the weight of the load is between 800 and 1000 kg.
2) For high boxes or when the material of the box is unstable, e.g. cardboard
NOTE!
If the box holders have no clamps, the load is not allowed to be tilted more
than 60º to each side.
2.2 Box holders with clamps
If the box can fall off, or if it has to be tilted more than 60º,
box holders with clamps have to be used.
Box holders with clamps can grip, hold and rotate boxes
with different heights.
The clamps are placed on the frame of the box and tightened
when the box is lifted up (no contact to the floor).
2.0 Functions and indentifications