21
Regular inspection and the replacement of worn or defective parts in good time will
prolong the life of the Rotator. “Prevention is better than repair”, therefore ensure:
• Check battery every 14 cycles
• Correct usage
•
Regular cleaning
•
Periodic safety and service inspection (see the back page)
•
Due to safety reasons, the below points have to be checked every
3 months:
- Loose screws and nuts have to be tightened up.
- Breaches, cracks or deformations are not allowed on the load-bearing
parts.
- Wearing parts, such as brakes, wheels and bearings, are to be adjusted
or changed continuously
6.1 Lubrication and hydraulic oil
Under normal operation conditions the Rotator requires no lubrication.
All ball bearings are sealed and lubricated for life, and moving parts
have self-lubricating bearings or are treated with grease.
The hydraulic system is filled with hydraulic oil of viscosity class ISO VG 15.
An additive is added to the oil. The concentrate reduces friction and wear and
protects against corrosion. Pre-mixed hydraulic oil with additive is available from
the dealer. The oil is suitable for use in the temperature range -10 to +50° C.
A thinner oil is recommended for temperatures lower than -10° C (if necessary,
contact your dealer).
6.0 Long live the Rotator
Summary of Contents for LOGIFLEX SELFR 1001/1600
Page 1: ...LOGIFLEX ROTATOR SELFR SELFSR ...
Page 9: ...9 1 3 0 How to operate the Rotator 3 3 Handle functions ...
Page 31: ...31 ...
