6
30°
B
The photocell can be turned 30° to the right or
left.
NOTE!
The photocell must point across the
pallet.
Due to safety the lowering movement will stop
automatically at a fork height of approx. 200 mm.
Programming of detection range and time delay
before operation
1. Press “Power on”. The green lamp is on. The lifting
equipment can start lifting/lowering automatically.
2. Use button (B) – choose the requested settings,
detection range or time delay before operation (the
lamp of the chosen setting lightens)..
3. Press the button (B) 3 seconds. The lamp of the
chosen setting flashes, when programming is
possible. The setting value is shown in the display.
4. Use the arrows (up/down) to change the value.
Detection range: 0,1m (min) to 2,0 m (max)
Time delay before operation: 00 s (min) to 25 s (max)
5. After 10 seconds the unit will store the value and
return to normal operations.
2.0 How to operate the Level Control
Summary of Contents for Level Control LC4
Page 1: ...Level Control LC4 ELF ELFS_SELF SELFS...
Page 2: ...2...
