9
4.2 Fuses - replacement
There are two fuses in the electrical circuit.
- See illustration under point 4.1
80 amp fuse in main supply from battery
(location: see A1, point 4.1)
5 amp fuse in control current circuit
(location: see A2, point 4.1)
Replacement:
Before replacing fuse, disconnect b pole. The old fuse can then be removed
and replaced by a new one of the same size.
Do not insert a larger fuse; the fuse acts as a protector for the pump motor.
Find out why fuses blow!
4.3 Wiring connections
Much operational disturbance is caused by poor connections in the electrical
circuit. Make sure connections are in order.
Check connections regularly for damage at insulating caps or looseness at plugs, etc.
Verdigris must be removed from lead plugs. Keep all screw/nut connections tight.
4.0 There must be a current supply...
Summary of Contents for EHS 1000RF-SEMI
Page 1: ...EHS 1000RF SEMI...
