2
English
Setup and Operation
Setting up your Logitech
®
Z-540 speakers
Referring to the diagram on the previous page, do the following:
•
Insert the colored plugs from each satellite speaker into the corresponding colored jacks
on the back of the subwoofer. Connect the DIN plug from the right front speaker
to the subwoofer as shown, being careful to align the pins before inserting the plug.
• 4-channel sound card:
connect the green plug from the audio input cable to the front jack
and the black plug into the rear jack into your sound card.
• 2-channel sound card:
connect the green plug from the audio input cable to the “line out”
jack on your sound card. Enable M3D
™
for the best sound.
•
Plug the power cord into an electrical outlet.
Enjoying your Logitech
®
Z-540 speakers
Power
To turn on/off system power, press the Power button on the right front speaker.
System Volume
With the computer running and an audio source active, adjust the system volume using
the knob on the right front speaker.
Subwoofer Volume
With the computer running and an audio source active, adjust the subwoofer volume on
the back of the subwoofer.
M3D
™
M3D
™
gives very realistic surround sound to material recorded in stereo – such as CDs, MP3s and
older games. To enable, press the M3D™ button on the right front speaker. If your speakers
are connected to a 2-channel sound card, we recommend that you use M3D™ at all times.
If you’re using a 4-channel card, you can experiment with M3D™ to find the sound you prefer.
Fader
To balance the output between the front and rear speakers, turn the fader knob on the right
front speaker.
