Logitech LTG-2100T, Setup Manual

Page: 10 / 22

LogicTech gyros - Servo Limit
The left and right servo limits for LogicTech gyros are INDEPENDENTLY adjustable,
unlike most other gyros. This allows you to maximise performance out of your available
tail travel. Doesn't have to leave an 'empty' travel which other gyros can't use.
Ensure your TAIL channel's Endpoint/EPA/ATV/Travel/etc are max out for this step.
Enter gyro setup mode. (I think we have done it enough times to get familiar by now)
Go to SERVO LIMIT (Green LED should be at SERVO LIMIT)
You will notice there will be no red LED at this stage.
Now move the rudder stick gradually to the left, Watch the tail slider.
Once the tail slider touches the end, the rudder stick may not be at it's end yet. This is
OK, stop moving the rudder stick and hold it at that position. Now press the MENU
button once. You will notice one red LED will light up on one end. This means that the
gyro has already registered that position as it's operating limit. You may see the LED is
on the other end for your gyro but it's ok. We're not done yet!