User Manual
Harmony 520
page 4
v. 1.0
Using Your Harmony Remote
This section provides you with information that will help you use your remote.
Using the Glow Button
Press the
Glow
button to light up or turn off the display backlight. To determine the length of time the
backlight stays on:
1. Connect your Harmony remote to your computer to start the Harmony remote software.
2. Click
Remote Preferences
.
3. Click
Settings
.
Displaying Help on Your Harmony Remote
From time to time when you select an Activity, the Activity may not work. This can happen when the
Harmony remote sends many infrared commands to set up all your devices for an Activity, but one or
more devices are not receiving some commands. The Harmony remote is then "out of sync" with your
devices (e.g. it thinks one of your devices is on, but it is turned off). Some of the reasons the Harmony
remote can become "out of sync" with your system are:
•
Someone walks between the Harmony remote and your entertainment system while an Activity is
starting.
•
You point your Harmony remote away from your system while an Activity is starting.
•
There is an object blocking the line-of-sight between your Harmony remote and the system.
•
You are very far away from your entertainment system.
You will need to use the
Help
button on your Harmony remote to resynchronize the remote with your
devices. Before resynchronizing, ensure the cause of the problem has been addressed.
Example
Remove all obstructions so that the entertainment devices can receive the infrared commands
from the Harmony remote.
