0
Pa
ir
in
g
Y
ou
r H
ea
d
se
t
Using Your Logitech
®
Cordless Headset
Note: The features listed below are phone dependent. Check your phone user’s manual.
. Starting a Call
Dial the numbers on your mobile phone keypad. When the call is connected, your headset will
automatically connect to the phone to take the call.
. Using Voice Dialing
Press and release the Multi-Function Button when in standby mode. Your phone may show a voice dialing
request on the screen. A click will be heard in the headset. After the click, speak the name of the person
you are calling. Call voice tags are pre-recorded in the phone.
. Ending a Call
Press and release the Multi-Function Button on the headset when in call mode, or end call from mobile
phone keypad.
. Answering a Call
After an incoming ring tone, press and release the Multi-Function Button once. Or, you can answer the call
with your mobile phone’s keypad. To transfer a call to your headset, press and release the Multi-Function
Button once or use the menu on your phone.
. Muting a Call
Press the Volume (+) and Volume (-) simultaneously for 3 seconds while in a call. You will hear a beep the
first time and every 30 seconds afterwards.
. Ending Mute
Press the Volume (+) and Volume (-) simultaneously for 3 seconds while in Mute mode.
You will hear a beep.
. Last Number Redial
When in Standby Mode, press the Volume (-) button for at least 3 seconds. You will hear a beep after
pressing the button and the last number will be dialed.
. Night Mode
Press all three buttons, Volume (-), Volume (+), and Multi-Function Button simultaneously for 3 seconds.
The light will not display and 4 quick beeps will be heard. Pressing the same three buttons again will
release the headset from Night Mode.
. Disconnecting the headset from the Phone (in order to connect to the USB receiver).
Go to the Bluetooth® menu on the phone. “Drop” or “disconnect the headset” (you do not need to delete
the headset entry). Turn off your phone. Follow the process to reconnect the headset to the USB receiver.
U
sin
g
Y
ou
r H
ea
d
se
t
Using Your Cordless Headset with Your Mobile Phone
Check for phone compatibility.
The Logitech® Cordless Headset is compatible with most Bluetooth® enabled mobile phones.
Consult your phone manufacturer for more information on compatibility.
Before pairing headset to phone, follow all charging and comfort and fit information on page 3.
To “pair” your headset to a Bluetooth® enabled mobile phone.
1. If your headset is connected to the PC (USB Receiver), disconnect it.
2. Turn on your phone. Turn off the headset. Make sure the battery is charged in both devices.
3. Press and hold the Multi-Function Button until the headset indicator light flashes blue and red
(about 10 seconds).
4. The headset now is in Pairing mode. Release the
button. The indicator light will continue flashing red
and blue.
5. Follow the pairing instructions for your Bluetooth®
phone. Typically, this is done by going to a ‘setup’ or
‘connect’ menu on your phone and then selecting the
options to ‘discover’ Bluetooth® devices.
6. Your phone should find the ‘Logitech HS05-Vxx’
headset. Confirm to pair.
7. Your phone should prompt you for a passkey or PIN.
The PIN/passkey is:
0000
.
8. If pairing was successful, the headset LED will
flash blue (3 repeating blue blinks).
9. If pairing fails, turn the headset and phone off and
repeat the process.
10. Red and blue flashing will return to stand-by mode
(blue flashing LED) if not paired in 2 minutes.
Note: It is not necessary to repeat the above pairing process every time you want to reconnect the
headset to the phone. Once paired, simply go to your phone’s “set-up” or “connect menu” and select
the ‘Logitech HS05-Vxx’ and choose “connect.”
Multi-Function
Button (MFB)
