GB
25
Selecting programmable options
If you make a mistake, the red indicator light will
flash. Repeat the procedure from the beginning.
●
For programming the key Prog., carry out the follo-
wing sequence:
Coding the Prog. key:
.
You can allocate one of the functions described below
to the Prog. key.
The
symbol represents a press of the “Off” key.
The
symbol represents a press of the “Total arm”
key.
●
Example, for programming the key
on the light
function, carry out the following sequence:
1.
Start
programming
by pressing
both keys
simultaneously
until the
indicator light
goes out
3.
Start
programming
by pressing
both keys
simultaneously
until the
indicator light
goes out
2.
Enter the
sequence
of
8 short key
presses
corresponding
to the selected
function
4.
Press
the
Prog.
key.
The light then
comes on again
for 5 seconds to
indicate
successful
programming
. . .
Function
Coding the Prog. key
Alert call
Silent alarm
Audible signal
Light
Stay arm
Gate “0”
Gate “1”
Summary of Contents for L2612
Page 32: ...32 ...
Page 36: ...803082 D LOGISTY 11 07 Trium ...
