6
Device Functions
When the device is first powered on, it will normally automatically attempt to connect to the Zigbee
Smart Home network. The
System Indicator
light will flash as it’s searching for the network. If it
connects, the light will remain on for 2 seconds and then go out.
If this does not happen, you can manually connect via the mobile app and follow the instructions
below.
Join the Zigbee Network
Press the
Multi-Function Button
once. The
System Indicator
light will start flashing, signifying it’s
searching for the network.
When it successfully connects, the
System Indicator
light will stay solid for 2 seconds then go out.
Quit the Zigbee Network
Long press the
Multi-Function Button
for 6 seconds. The
System Indicator
light will flash 4 times and
go out. The device has now been successfully removed from the network and been reset to the
factory defaults.
User Guide
Water Leakage Detection
When this device detects water leakage, it will send a notification to your mobile app. The
System
Indicator
will also flash red at the same time. You can bind the device to various devices using the
Housekeeper (Linkage) Task
to perform other functions, like sounding an alarm and/or shutting off
the water supply with the
Smart Valve Manipulator
.
Low Battery
When the battery level is low, an alert will be sent to the mobile app, reminding you to change the
battery.
