6
Device Functions
When the device is first powered on, it will normally automatically attempt to connect to the Zigbee
Smart Home network. The
System Indicator
light will flash as it’s searching for the network. If it
connects, the light will remain on for 2 seconds and then go out.
If this does not happen, you can manually connect via the mobile app and follow the instructions
below.
Join the Zigbee Network
Press the
Multi-Function Button
once. The
System Indicator
light will start flashing, signifying it’s
searching for the network.
When it successfully connects, the
System Indicator
light will stay solid for 2 seconds then go out.
Quit the Zigbee Network
Long press the
Multi-Function Button
for 6 seconds. The
System Indicator
light will flash 4 times and
go out. The device has now been successfully removed from the network and been reset to the
factory defaults.
