Logik LSBSDX17, Instruction Manual

Page: 7 / 20

Location
When selecting a position for your unit you should make sure the floor is flat and firm, and
the room is well ventilated with an average room temperature of between 10°C and 43°C.
Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct
sunlight as it may increase the electrical consumption. Extreme cold ambient temperatures
may also cause the unit not to perform properly. This unit is not designed for use in a garage
or outdoor installation. Do not drape the unit with any covering.
Levelling the Unit
To do this adjust the two levelling feet at the front of the unit.
If the unit is not level, the doors and magnetic seal alignments
will not be covered properly.
Make sure the levelling feet (not the rollers) are well secured to
the floor to prevent movement of the appliance.
Free Space Requirements
When installing the unit, ensure that 25
mm of free space is left at both sides, 50
mm at the rear and 25 mm at the top of
the unit.
Please ensure there is more than twice
the width and depth distance space of
the unit to fully open the door.
Y mm Y mm
X mm X mm
Moving the Unit
Adjust the levelling feet until the rollers can roll freely.
7
INSTALLATION
LSBSDX17_IB_170228_grace.indd 7 28/2/17 10:29 am