Logik LOGPD1008, User Manual, Page: 11 / 28

11
PORTABLE DVD PLAYER USER GUIDE
1 2
1
2
3
4
1
Insert USB Flash Drive
2
Insert MMC/SD Card
3
Connect earphones
4
Speaker (with 3.5mm
audio cable, not supplied)
• Press Mode on the remote and select “USB” or
“CARD READER” to switch to USB/CARD Mode.
Notes:
• The design of the device may vary by location. Besides, please note the draw-
ings shown on here are only examples. These image are not necessarily to scale.
Some buttons and interface positions may differ on this device. However the
identification information should remain the same.
• This unit supports “USB 1.1 Mass Storage Class Bulk-Only Transport” devices
only. Most USB thumb drives and portable hard disk drives are supported. Other
USB devices such as MP3 players, digital cameras, and mobile phones may not
be compatible.
• Supported USB drives and Memory cards must be formatted with the FAT file
system. Drives and Memory cards formatted with NTFS file system are not sup -
ported.
• In some cases, an incompatible USB device or Memory card may cause the
player to stop responding. If this occurs simply turn off the power, remove the
USB device or Memory card, and turn the player back on.
Connecting to Other Equipment
Connection
- continued