![Logik LID45W18 Instruction Manual Download Page 34](http://html1.mh-extra.com/html/logik/lid45w18/lid45w18_instruction-manual_1935085034.webp)
34
Spray Arms
Particles of food can get stuck in the spray arm jets and block them. They should be checked and cleaned
regularly.
1. Ensure the dishwasher is switched off.
2. Check the holes in the upper and lower spray arms for clogging. If there is any clogging, remove the
spray arms and clean them under running water.
3. The lower spray arm can be removed by pulling it upwards, while the upper spray arm nut can be
removed by turning the nut anticlockwise.
4. Be sure that the nut is perfectly tightened when refitting the upper spray arm.
Frost Precaution
Avoid placing the dishwasher in a location where the temperature is below 0°C. If your appliance is left in
an unheated place over the winter, you are advised to:
1. Disconnect the unit from the water inlet.
2. Turn on the unit. Select any washing cycle and let it run for 1 minute only. This will allow all the
excessive water that remains in the unit to drain out.
3. Disconnect from the mains.
4. Empty the dishwasher.
5. Close the dishwasher’s door.
6. Disconnect the unit from the water drain. Use a suitable receptacle to catch any residual water
in the pipes.
Should you encounter any difficulties with the above steps, please ask a service technician
for assistance.
Moving The Dishwasher
If you have to move the unit, for instance due to moving house, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the unit from the water inlet and drain. Use a suitable receptacle to catch the water.
3. Remove the unit from the current location with the hoses discharged.
4. Pull the unit out together with the hoses.
Maintenance for a Prolonged Period of Non-operation
If you are not going to use the unit for a prolonged period of time, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the dishwasher from the water inlet and drain. Use a suitable receptacle to catch any
residual water in the pipes.
3. Slightly open the door to prevent unpleasant smells building up in the compartment.
4. Ensure the washing compartment of the dishwasher is clean.
Should you encounter difficulties to do the above steps, please ask a service technician for assistance.
• Avoid over tilting the unit during transportation.
• We recommend that 2 people handle the dishwasher during installation.
Logik Integrated Diswasher LID45W18 Manual.indd 34
07/12/2018 12:12