After the system reset, all the tuned stations, DAB & FM
preset stations will be erased.
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket
before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free
cloth.
• Do not use any cleaning fluids containing alcohol, ammonia
or abrasives.
• Do not spray an aerosol at or near the unit.
Specifications
Mains Supply
5 V / 0.5 A
Built in Battery
3.7 V / 1000 mAh
Dimension
46 mm (W) x 22 mm (D) x 70 mm (H)
Radio Frequency Range
FM 87.5 MHz – 108 MHz
DAB Band III 174.928 – 239.200 MHz
Presetting Stations (DAB or FM mode)
You can store up to 10 of your favourite stations to the
memory. This will enable you to access your favourite stations
quickly and easily.
1. To store a preset, you must first be listening to the station
that you would like to save, then press and hold the
PRESET/INFO Button.
2. Press the Buttons to select your desired preset station
number.
3. Press and hold the MODE/SELECT Button to confirm the
selection.
4. The station will be stored and the display will show “Preset
## Stored“.
Recalling a Preset Station
1. Press and hold the PRESET/INFO Button.
2. Press the Buttons to select your desired preset station
number.
3. Press the MODE/SELECT Button to confirm the selection.
4. If you choose a preset that has been allocated a station, the
display will show “Preset ## Stored“.
System Reset
There may be times when you need to reset your unit back
to the factory settings. If you experience reception problems
you may want to reset and try again. If you move the unit to
another part of the country and pick up the local and national
DAB stations in that area, your previously tuned channels may
no longer be available.
Press the Button and then press Button to select
System Reset. Press the MODE/SELECT Button to confirm. The
display shows Press Select to Reset. Press the MODE/SELECT
Button to confirm. The display will show System reset OK. The
unit will then start the Full scan for DAB channels immediately.
Safety Warnings
The symbol on the product or its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility
to dispose of your waste equipment by handing it over to a designated collection
point for the recycling of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of disposal will help
conserve natural resources and ensure that it is recycled in a manner that protects
human health and the environment.
For more information about where you can drop off your waste for recycling, please contact
your local authority, or where you purchased your product.
DSG Retail Ltd. (co. no. 504877
Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK
IB-LHDAB14-141007V2
For general information about this appliance and handy hints and tips,
please visit www.knowhow.com/knowledgebank or call 0344 5611234.
• Read all the instructions carefully before
using the unit and keep them for future
reference.
• Retain the manual. If you pass the unit
onto a third party make sure to include
this manual.
• Check that the voltage marked on the
rating label matches your mains voltage.
Damage
• Please inspect the unit for damage after
unpacking.
• Do not continue to operate the unit if you
are in any doubt about it working normally,
or if it is damaged in any way - switch off,
withdraw the mains plug and consult your
dealer.
Temperature
• Avoid extreme degrees of temperature,
either hot or cold. Place the unit well away
from heat sources such as radiators or gas/
electric fires.
• Avoid exposure to direct sunlight and
other sources of heat.
Naked Flames
• Never place any type of candle or naked
flame near the unit.
Moisture
• To reduce the risk of fire, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing.
No objects filled with liquids, such as vases,
should be placed on the unit.
• If you spill any liquid into the unit, it can
cause serious damage. Switch it off at the
mains immediately. Withdraw the mains
plug and consult your dealer.
Interference
• Do not place the unit on or near appliances
which may cause electromagnetic
interference. If you do, it may adversely
affect the operating performance of the
unit, and cause a distorted picture or
sound.
Earphones
• Listening to loud sounds for prolonged
periods of time may permanently damage
your hearing.
• Before putting on earphones, turn the
volume down then put the earphones on
and slowly increase the volume until you
reach a comfortable listening level.
Supervision
• Children should be supervised to ensure
that they do not play with the unit.
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a
fatal electric shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the unit’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the manual
accompanying the unit.
Service
• To reduce the risk of electric shock, do not
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualified personnel.
• Do not open any fixed covers as this may
expose dangerous voltages.
Maintenance
• Ensure to unplug the unit from the power
supply before cleaning.
• Do not use any type of abrasive pad or
abrasive cleaning solutions as these may
damage the unit’s surface.
• Do not use liquids to clean the unit.
Hints and Tips
Problem
Cause / Solution
No Sound
Adjust the volume control, it may not be turned up.
Static Sound
Signal reception is too low. Move the unit to a stronger
signal location.
Sound is
distorted
Volume is too high. Adjust the volume control.
Desired
station not
found
Weak signal. Use the Manual Scan function.
The display
shows “No
Service”
• No DAB coverage in your area or poor reception.
Move the unit to an area with DAB coverage.
• Adjust the headphone (aerial) cable for the
optimum reception.
The display is
blank
This may occur if the broadcaster changes the label of
a service or removes a label while tuned. The unit will
try to retune or perform a scan.
FM Operation
Switching from DAB to FM Mode
To switch the unit from DAB to FM mode, press and hold the
MODE/SELECT Button. The display shows “Switching to FM”.
On the top line of the display is the current frequency. On the
bottom of the display, <Programme Type> will show since
no channel is tuned in and no RDS (radio data system) data is
available.
Auto Scan
In FM mode, press and hold the Button to start auto
scan.
Manual Scan
To search FM stations manually, simply press the Buttons
repeatedly until your desired frequency is reached.
With FM radio it may be necessary to fine tune each
station by pressing the
buttons repeatedly. Each
press will adjust the frequency by 0.05MHz. If reception is
still poor, try moving the radio to another location.
FM Display Modes
Press the PRESET/INFO button repeatedly to show the
information of the stataion.
LHDAB14_IB_141007_will.indd 2
7/10/14 5:40 PM
