4
INSTALLATION
Installation
Location
When selecting a position for your unit you should make sure the floor is flat and firm, and
the room is well ventilated with an average room temperature of between 16°C and 38°C.
Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct
sunlight as it may increase the electrical consumption. Extreme cold ambient temperatures
may also cause the unit not to perform properly. This unit is not designed for use in a garage
or outdoor installation. Do not drape the unit with any covering. This refrigerating appliance
is not intended to be used as a built-in appliance.
Levelling the Unit
To do this adjust the two levelling feet at the front of the unit.
If the unit is not level, the doors and magnetic seal alignments
will not be covered properly.
Y mm
X mm
Free Space Requirements
When installing the unit, ensure that 25 mm
of free space is left at both sides, 50 mm at
the rear of the unit and 25 mm at the top of
the unit. The door can be opened to the right
or the left, depending on which best suits
the location.
Please ensure there is more than twice the
width and depth distance space of the unit
to fully open the door to a maximum angle.
LFFD55S18_IB_RC_200716_grace.indd 4
LFFD55S18_IB_RC_200716_grace.indd 4
16/7/2020 8:00 PM
16/7/2020 8:00 PM
