Sa
tet
y W
ar
nings
Oper
ation
Cleaning
, M
ain
tenanc
e
and T
roubleshooting
Specifica
tion
Bef
or
e U
se
GB-6
Cleaning
Regular cleaning will help to maintain the effectiveness of your Cooker Hood.
1. Switch off and unplug the Cooker Hood before cleaning.
2. Clean the inside and outside of the Cooker Hood with a damp cloth and a mild detergent.
NOTE:
Do not use solvents or abrasives as this may damage the Cooker Hood.
Warning
: Your Cooker Hood can become a fire risk if it is not cleaned correctly
Please be careful when cleaning this appliance as sheet metal can cause injury if not handled with case.
Cleaning the filters
To ensure the filters do not become a fire hazard we recommend they are washed every 3 months. Do not check the
filter panels whilst the Cooker Hood is in use.
1. Before cleaning the filters always switch off and disconnect the electrical supply.
2. Remove the filter panels by holding down the buttons on each panel and lifting towards you. They can then
be taken out of the cooker hood.
3. Wash each filter in warm water and a mild detergent, leave to soak and drain. Ensure it is completely dry
before replacing into the Cooker Hood.
4. Place the bottom of each panel into the back of the Cooker Hood and raise the top to click into position.
NOTE:
The filter panels are also dishwasher proof. The filter panels may alter in colour slightly after several washes,
this is not a fault.
