11
Door Removal
1. Turn off the oven and make sure that it is cold. Switch off its
isolation switch.
2. After removing the cover in front of the light, take out the bulb
by turning anti-clockwise.
3. Insert the new bulb, which should be resistant to 300°C.
For replacement bulbs contact your local service centre or
Partmaster Direct (details at the back of this guide).
4. Re-fit the cover.
5. If in any doubt, consult a qualified electrician for help.
Replacing the Oven Lamp
Ensure that the appliance is switched off before replacing
the light to avoid the possibility of electric shock.
Take care when handling parts with glass, knocks, chips, heavy handling and dropping could cause
the glass to shatter.
Bulb specifications
230V~ 50 Hz, 25W, E14
2. The swivel retainers of the right hand and left hand hinges
are hooked onto the metal bar above them. Lift the
retainers as shown.
* All images are for indication only; please refer to your individual unit for actual item.
It is possible to remove the door. Follow the steps below to remove the door. This may be required if easier access
to the cavity is required or if you wish to clean the door parts.
1. Open the door completely.
LBPCKX12_Oven_IB_120601_Annie(Check).indd 11
12年6月1日 下午5:51
