Saf
et
y
W
ar
nings
Produc
t O
ver
view
s
Connec
tions
Sy
st
em
Set
-up
Pla
yable
Disc
/ Suppor
tiv
e
For
ma
ts
/ P
la
yback
Func
tions
H
in
ts
and
Tips
and
Specifica
tion
GB-10
How to Charge the Battery Pack
1. Connect the DC power cable to the DVD Player’s
DC IN socket.
2. Connect the AC power adapter to the DC IN
socket on the battery pack.
Remote Control Operation Range
Point the remote control at the DVD Player no more than
5 metres from the remote control sensor and within 60° of
the front of the DVD Player. The operating distance may
vary depending on the brightness of the room.
Within about 5 m
30° 30°
Battery Pack
How to Attach the Battery Pack
1. Align the pack with the DVD Player.
2. Slide the pack until the battery is locked securely in
position.
Release button
Battery lock
Power LED indicator
DC IN socket
DC power cable
Guides
•
The battery will NOT charge while the DVD Player is turned on and is being used.
•
Turn the power off when attaching or removing the battery pack.
•
Use the supplied AC power adapter to charge the battery pack.
•
The lifetime of the battery pack is limited. Power is slowly drained when not in use. If the battery pack does not
last long even after a full charge, you might have to replace it with a new one.
To remove the pack, press the Release button, then slide it away.
•
Ensure the battery is charged for a minimum of 6 hours before first time use.
The power LED indicator illuminates red during charging. When the battery is
fully charged, the LED indicator illuminates green.
•
Normal play time for the fully charged battery is approx 2.5 hours.
Logik L7TDVD10_IB_100818.indd 10
18/08/2010 4:11 PM