24
GB
This instruction manual explains the basic instructions for operating this unit. Some DVDs
are produced in a manner that allows for specific or limited operation during playback.
Therefore, this unit may not respond to all operating commands. This is not a defect.
Please refer to the instructions accompanying the specific DVD in question for more
information about the options available on that DVD.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is
not permitted by the unit or disc.
Basic DVD Playback
1. Slide the
ON/OFF
switch to the
ON
position.
2. Slide the
OPEN
switch to open the disc cover.
3. Hold the disc by its sides and carefully place onto
the disc holder with the label side facing up.
Gently push the disc down until you hear a “click” .
4. Close the disc cover. Use the stand located at the
rear of the unit or hold the DVD player in your
hands (be careful not to touch the unit’s disc
door). The unit starts playback if the disc does not
have any menus recorded on it. If the disc has one
or more titles recorded on it, a menu screen will
appear on the screen.
5. To play a title, press the
/
0-9
buttons on
the remote control to highlight the title and then
press the button on the unit or the remote
control.
DVD Playback
Ensure that the screen protection film is removed before use.
Stop Playback
1. Press the
button on the unit or the
STOP/SLOW
button on the remote control to go
to pre-stop mode, the TV screen will display “
STOP
”. With some discs, the unit can
recall the stopped location, such as on DVDs.
2. Press the button on the unit or the remote control to resume playback from the
location where playback was stopped or from the beginning of the disc.
3. Press the
button on the unit or the
STOP/SLOW
button on the remote control twice
to stop completely.
CHG
open to stand
L7PDT13E_IB_RC_130610_Zell.indb 24
10/6/13 5:30 PM
Summary of Contents for L7PDT13E
Page 2: ......
