Logik L614WD13, Instruction & Installation Manual

Page: 23 / 32

23
5. Turn it clockwise and screw the filter back in place.
Preventing a Frozen Water Supply Hose
If your washing machine is delivered in freezing weather conditions,
leave it at room temperature for 24 hours after you’ve set it up before
using it. This ensures there’s no ice blocking the water supply hose. If
your water supply hose freezes, add 2 or 3 litres of warm water to the
drum. Then run a “Spin” only programme.
Cleaning the Filter Net of the Water Supply Hose
1. Turn the water supply off at the tap.
2. Close the washing machine door and select “Drain” programme and press the Start/Pause
button.
3. When finished, turn the power off. Loosen the water supply hose and remove it from the
washing machine.
4. Use a small brush, e.g. a toothbrush to clean the filter of the water supply hose.
5. Re-connect the water supply hose to the washing machine and turn the tap back on,
checking for leaks.
Before cleaning the drain filter, switch off and unplug the washing machine.
1. Use a coin to open the Service Flap.
Cleaning the Drain Filter
about
50°C
2. Carefully loosen the drain filter. Water may drain out - this is normal.
3. Turn it anticlockwise, unscrew the filter and remove it.
4. Remove any lint and debris before carefully replacing the filter.
90
60
40
1400
1000
800
400
Temp. Speed Intense Start/Pause
Delay
20
Power
Pre-Wash
Standard
Eco
Synthetic
Wool
Cotton
Quick Wash Mix
Delicate
Spin
Rinse
Dry
Dry
Service Panel
Turn
Be careful not to burn yourself while handling your clothes or touching the inside of the drum
after a high temperature wash.