![Logik L612WSM16E Instruction Manual Download Page 30](http://html1.mh-extra.com/html/logik/l612wsm16e/l612wsm16e_instruction-manual_1935575030.webp)
30
GB
Adding Detergent and Softener
• Add detergent into the appropriate dispenser.
• Apply softener before you start washing.
• Apply detergent and softener according to the washing amount, the soiling level, the water
hardness in your area and the manufacturer’s instructions of these products.
Dilute viscous fabric softener and fabric conditioner with water. Prevent blockage of the
overflow. Maximum level is 40ml.
• Do not use the washing machine when the detergent drawer is removed. It may cause a
water leak or it may not work normally.
• If you forget to add detergent, you can drain the washing machine by running a drain only
programme. Then you can add detergent and start the programme again. Detergent only
reaches the drum when water flushes through the detergent drawer.
• To prevent powder detergent staying in the drawer, dry the inside of the drawer with a cloth.
Make sure the powder isn’t lumpy when you add it into the drawer.
• If the rinse cycle isn’t removing all the detergent from your wash, use less detergent.
• Softener should not exceed the MAX level in the compartment.
• Wash out unused softener with a splash of water or a damp cloth after the programme has
finished.
II
I
Main wash
detergent
Softener
Pre-wash
detergent
L612WSM16E_IB.indb 30
21/03/2016 16:04