![Logik L612WM13 Instruction & Installation Manual Download Page 7](http://html1.mh-extra.com/html/logik/l612wm13/l612wm13_instruction-and-installation-manual_1935573007.webp)
INSTALLATION
7
Installing Your Washing Machine
Please read and follow the instructions carefully.
• In addition to the instructions mentioned here, special regulations of the relevant
water and power supply companies may apply. If in doubt, have the washing machine
connected by a qualified technician.
• The washing machine is heavy - caution when lifting it. Do not lift by projecting
components (e.g. washing machine door).
• Warning: Frozen hoses may tear/burst. Do not install washing machine in outdoor areas
or where there is a risk of frost.
• Lay hoses and cables in such a way that there is no risk of tripping over them.
Choosing the Right Location for Your Washing Machine
• Make sure there’s enough space for your washing machine.
• Install your washing machine on a flat, stable surface to avoid excessive vibrations and
noise.
• Don’t install your washing machine in direct sunlight or in a place where temperatures
can reach freezing.
Ò
Ò
Ò
Sloping
surface
Unstable
Bumpy
surface
Two or more people are required to move
the washing machine.
• The ventilation openings at the base of the washing machine must not be obstructed by
carpet.
• Start by tilting the washing machine backwards.
• One person should stand behind it, holding the rear of the top panel. The other person
should grip the bottom feet at the front.
• Check that you have all the required accessories for installation.
• We recommend that you entrust the installation of the washing machine to a qualified
technician.
An additional space (approximately 50mm) is required at the rear of the washing
machine. This is to allow enough space for the water hose and drain hose
connections.
x
Sloping
surface
x
Unstable
x
Bumpy
surface
INSTALLATION
L612WM_S13_B14_IB_RC_140423_grace.indd 7
23/4/14 5:33 pm