16
Mounting the Cooker Hood
1. We recommend that for air extraction installations, a professional tradesperson is consulted prior to any
work being undertaken. A 150mm or 120mm hole will need to be provided for the aluminium flexible hose
(not supplied) to duct the extracted air to the outside. For recirculation operation, a competent layman
can follow the instructions below. If you are in any doubt, we recommend you consult a professional
tradesperson.
2. Ensure there is an available switched mains socket adjacent to the hood to power the appliance. If this
is not available, do not use extension leads. We recommend you consult a qualified electrician prior to
commencing any work.
3. The unit itself is with 150mm air outlet. Firstly; you need to install 2 pieces of Outlet Flap (OF150C3) onto the
air outlet. The 2 pieces of Outlet Flap are completely same. Take out one piece; make sure that the side with
protruding points is the upper side. Then; insert one end into the relative hole on air outlet which located
on the top of unit. Bend it a little and insert another end into the hole on the other end of air outlet. Do the
same of another Outlet Flap. If your kitchen is with 120mm hole; you need to mount Adaptor (AD) onto air
outlet before connecting the aluminium flexible hose.
4. You can either use the drill template to mark the position of the fixing screws or position the hood on the
wall (make sure the minimum distance should be 650mm above electrical hob and 750mm above gas hob)
and mark the position "A", "B", "C", "D" and "E" as shown.
5. Screw the External Chimney to the External Chimney Connection Plate by screwing 2 pcs of the 4 x 8mm
screws through the mounting holes at the top of External Chimney. Screw the Internal Chimney to the
Internal Chimney Connection Plate by screwing the other 2 pcs of 4 x 8mm screws through the mounting
holes at the top of Internal Chimney.
• We recommend professional tradespersons are consulted prior to the fitting of this appliance.
• Each installation is different and these instructions should be used as a guide only. If in doubt
consult professional tradespersons.
• Air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas
or other fuels.
Before drilling any holes, ensure there is no pipe work or wires buried in the wall.
230
300
A
C
F
G
D
E
B
256
243
250
L60CHDB12_LCHD60S12_IB_120919_Zell.indd 16
19/9/12 2:17 PM
