Logik L32LW783, User Manual, Page: 35 / 41

English - 35 -
Whenever you press the BLUE button, APS
function stops and Program Table appears on
the screen.
If you wait until the end of APS, Program Table
will be displayed with the programmes found
and located.
Source Menu
Press “ ” or “ ” button and select the sixth icon.
Then press “ ” or
OK button. Source menu
appears on the screen:
In source menu, highlight a source by pressing
“ ” or “ ” button and switch to that mode by
pressing “ ” button. Source options are;
TV ,
DTV , EXT-1 , EXT-2 , FAV , HDMI-1 , HDMI-2 ,
YPbPr .
Note : Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.
Displaying TV Information
Programme Number , Programme Name ,
Sound Indicator and Zoom Mode information is
displayed on the screen when a new programme
is entered or “
” button is pressed.
Mute Function
Press “ ” button to disable sound. Mute
indicator will be displayed in the upper side of
the screen.
To cancel mute, there are two alternatives; the
fi rst one is pressing the “
” button and the
second one is increasing the volume level.
PIP (Picture-in-Picture) and
PAP (Picture-and-Picture)
Modes
Press the “ ” button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 1 size
and 4 positions (upper left, upper right, bottom
left and bottom right) available for the PIP
window. You can use “
” button to change the
PIP position. Aspect Ratio of the PIP window is
fi xed and 4:3.
When PIP Mode is entered, the default active
window is the PIP window and the active window
is indicated by a red frame around it. The active
window can be changed by pressing “ ” or “
” button. The status info OSD belongs to active
window. The place of the status OSDs are same
for both windows.
Press the “ ” button again to exit the PIP
mode.
Press the “ ” button to switch to PAP mode.
At PAP Mode, two pictures with equal sizes are
displayed on the screen. Aspect Ratios of the
windows are fi xed.
When you switch to PAP Mode, main window in
PIP Mode will be displayed on the right side of
the screen. The active window can be changed
by pressing “ ” or “ ” button.
Press the “ ” button again to exit the PAP mode.
Picture Mode Selection
By pressing PP button, you can change Picture
Mode settings in accordance with your viewing
requirements. Available options are Dynamic,
Natural, Cinema.
Freezing Picture
You can freeze the picture on the screen by
pressing the “
OK ” button on the remote control.
Press the “ OK ” button to freeze picture. Press
again to quit freeze mode.
Note : This feature will be unavailable to be used while
watching YPBPr and HDMI sources.
Zoom Modes
You can change the aspect ratio (image size)
of the TV for viewing the picture in different
zoom modes.
[GB]_MB35_IDTV-PANEU_BRONZE1_3297W_1072UK_10059976.indd 35 [GB]_MB35_IDTV-PANEU_BRONZE1_3297W_1072UK_10059976.indd 35 17.11.2008 08:34:48 17.11.2008 08:34:48