Logik L32HED12 Instruction Manual Download Page 69

69

GB

Saf

et

y W
ar

nings

Standby 
•  The 

 button on the remote control does not switch 

off the unit completely. The unit will continue to draw 
electricity from the mains supply while in standby. In 
the interests of safety and to avoid unnecessary energy 
consumption, never leave the unit in standby while 
unattended for long periods of time, e.g. overnight, 
while on holiday or while out of the house. Disconnect 
the mains plug from the mains socket.

Batteries
•  Batteries used in the remote control for this unit 

are easily swallowed by young children and this is 
dangerous. 

•  Keep loose batteries away from young children and 

make sure that the battery holder tray is secure in the 
remote control. Seek medical advice if you believe a 
cell has been swallowed.

•  Please dispose of batteries correctly by following the 

guidance in this manual.

•  The batteries shall not be exposed to excessive heat 

such as sunshine, fire or the like.

Supervision
•  Children should be supervised to ensure that they do 

not play with the unit and the remote control.

•  Never let anyone especially children push anything 

into the holes, slots or any other openings in the case - 
this could result in a fatal electric shock.

DVD
•  Class 1 Laser Product

This unit utilises a laser. Use 

of controls, adjustments or 
performance of procedures other 
than those specified herein may 
result in hazardous radiation 
exposure.

•  Before moving the unit, ensure the disc tray is empty.
•  Always remove the disc when the unit is not in use.
•  Failure to do so will risk severely damaging the disc 

and the unit.

•  Do not stack devices, heat from other devices may 

affect the performance of the unit.

CLASS 1 

LASER PRODUCT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, 

within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the unit’s 
enclosure that may be of sufficient 
magnitude to constitute a risk of electric 
shock.

The exclamation point within an equilateral 

triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
manual accompanying the unit.

Service
•  To reduce the risk of electric shock, do not remove 

screws. The unit does not contain any user-serviceable 
parts. Please leave all maintenance work to qualified 
personnel.

•  Do not open any fixed covers as this may expose 

dangerous voltages.

Maintenance
•  Ensure to unplug the unit from the mains socket before 

cleaning.

•  Do not use any type of abrasive pad or abrasive 

cleaning solutions as these may damage the unit’s 
surface.

•  Do not use liquids to clean the unit.
•  The wall socket plug is used as a disconnect device, the 

disconnect device should be readily accessible.

• 

 This equipment is a Class II or double insulated 

electrical appliance. It has been designed in such a 
way that it does not require a safety connection to 
electrical earth.

To prevent the spread of fire, keep 

candles or other open flames away 

from this product at all times.

L32HED12_IB_Running Change_120613_Annie.indd   69

12年6月13日   下午7:00

Summary of Contents for L32HED12









































































Reviews: