Logik L26DVDB21, Instruction Manual, Page: 17 / 68

17
GB
Initial
S
etup
7.. Channel tuning will commence. This operation may take up to 6
minutes. The display will show the progress of the tuning and the
number of channels found.
8..
If you want to skip the ATV tuning, press the
MENU
button to
interrupt the tuning half way. A pop-up screen will be displayed,
press the button to select
YES to confirm. You will then go
straight to DTV tuning. You may repeat the above step if you also
want to skip the DTV tuning. An installation reminder will appear
the next time you turn on the TV.
9..
After tuning is complete, the channels are arranged in a preset
order. If you wish to skip channels, modify the preset order or
rename channels, select
Channel.Edit under the Channel menu
(refer to page 20-21 for details).
Selecting.the.Input.Source
1.. Press the button on the right side panel of the TV or the
INPUT
button on the remote control to display the Input source
list.
2.. Press the buttons to select the input source that you want:
DTV / ATV / SCART / YPbPr / PC / HDMI1 / HDMI2 / AV1 (REAR) /
AV2 (SIDE) / DVD / DMP.
3.. Press the OK button to confirm your selection.
Alternative
Press the TV.RD button to switch to TV / digital radio
channels directly. (DTV mode)
Channel.Selection.
• Press the
CH +./.–
buttons on the remote control repeatedly or the
0-9
buttons to select the channel.
Alternative
Press the
LIST
button to enter the
Channel.List
. Then use the buttons to highlight and select the channel.
Press the OK button to view the selected channel.
• If a blocked channel is selected, the password screen will be displayed. Press the
0-9
buttons to enter the password, the
channel will then be unlocked (refer to page 35 for details on Block.Channel ).
• Press the
FAV
button to view the
Favourite.List
. Then use the buttons to highlight and select the channel. Press the
OK
button to view the selected channel (refer to page 20-21 for details on
Channel.Edit
).
• Press the button to return to the previously viewed channel.
Display.Channel.Information
• Press the
i
button to view the current information.
Volume.Adjustment
• Press the VOL.+ or – button on the side panel of the TV or on the remote control to adjust the volume.
• If you wish to switch the sound off, press the
MUTE
button. Press the
MUTE
button again or the
VOL.+
button to resume
audio listening.
Input Source
OK
DMP
Input Source
OK
DTV
ATV
SCART
YPbPr
PC
HDMI1
HDMI2
AV1 (REAR)
AV2 (SIDE)
DVD
Channel Tuning
TV : 3 Channel(s)
DTV : 0 Channel(s)
Radio : 0 Channel(s)
Data : 0 Channel(s)
36%... 668.75MHz (TV)
Please press MENU to skip.
L26DVDB21_IB_111004_Annie.indd 17 11年10月4日 下午5:56